Advertisement
Troubleshooting
Problem
Cause
Solution
Scan line does
MC70 is not attached
Remove the MC70 from
not appear when
properly to the Trigger
the Trigger Handle and
trigger is
Handle and is not making
reinsert.
pressed.
contact with the
connector.
MC70 does not contain a
Load a scanning
scanning application.
application on the MC70.
Refer to the MC70
Integrator Guide.
Scanning application is
Start the scanning
not active.
application.
MC70 battery
Trigger Handle is not
Remove the Trigger
does not charge
properly seated in the
Handle from the cradle
when Trigger
cradle.
and reinsert.
Handle is placed
in a cradle.
Power is not available to
Ensure that power
the cradle.
connections to the cradle
are connected properly.
Cannot print to
Printer cable not
Ensure cable is
printer.
connected properly.
connected properly to the
printer and Trigger
Handle.
MC70 does not
The trigger only wakes
Press a key on the MC70
wake from
the MC70 from the
to wake from the
suspend mode
suspend mode if a
suspend mode.
when trigger is
scanning application is
pressed.
active.
Refer to the MC70 User Guide for MC70 specific troubleshooting
procedures.
Ergonomic Recommendations
In order to avoid or minimize the potential risk of
CAUTION
ergonomic injury follow the recommendations below.
Consult with your local Health & Safety Manager to
ensure that you are adhering to your company's safety
programs to prevent employee injury.
Reduce or eliminate repetitive motion
•
Maintain a natural position
•
Reduce or eliminate excessive force
•
Keep objects that are used frequently within easy reach
•
Perform tasks at correct heights
•
Reduce or eliminate vibration
•
Reduce or eliminate direct pressure
•
Provide adjustable workstations
•
Provide adequate clearance
•
Provide a suitable working environment
•
Improve work procedures.
•
4
Regulatory Information
This device is approved under the Symbol Technologies brand;
Symbol Technologies, Inc., is the Enterprise Mobility business of
Motorola, Inc. ("Motorola").
All Symbol devices are designed to be compliant with rules and
regulations in locations they are sold and will be labeled as required.
Any changes or modifications to Symbol Technologies equipment,
not expressly approved by Symbol Technologies, could void the
user's authority to operate the equipment.
Only use Symbol approved and UL Listed mobile
CAUTION
computers, accessories, battery packs and battery
chargers. Do NOT attempt to charge damp/wet mobile
computers or batteries. All components must be dry
before connecting to an external power source.
Local langauge translations are available at the following website:
http://support.symbol.com.
Power Supply
Use only a Symbol approved and correctly rated power supply as
appropriate for the country of operation. Use of alternative power
supplies will invalidate any approval given to the device and may be
dangerous.
Refer to the MC70 User Guide for detailed power supply
information. The latest product documentation (User Guide) is
available at http://support.symbol.com.
Battery Charging
To charge the battery for the mobile device, battery and charger
temperatures must be between +32° F and +104° F (0° C and +40°
C).
Radio Frequency Interference Requirements - FCC
This equipment has been tested and found to
N
OTE
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from
•
that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for
•
help.
Radio Frequency Interference Requirements - Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
5
Marking and European Economic Area (EEA)
Symbol Technologies, Inc., hereby declares that this device is in
compliance with all the applicable Directives, 89/336/EEC, 73/23/
EEC. A Declaration of Conformity may be obtained from http://
www2.symbol.com/doc/
Waste Electrical and Electronic Equipment
(WEEE)
English: For EU Customers: All products at the end of their life must be
returned to Motorola for recycling. For information on how to return product,
please go to: http://www.symbol.com/environmental_compliance.
Bulgarish: За клиенти от ЕС: След края на полезния им живот всички
продукти трябва да се връщат на Motorola за рециклиране. За
информация относно връщането на продукти, моля отидете на адрес:
http://www.symbol.com/weeelink.
Dansk: Til kunder i EU: Alle produkter skal returneres til Motorola til
recirkulering, når de er udtjent. Læs oplysningerne om returnering af
produkter på: http://www.symbol.com/environmental_compliance.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende
ihrer Lebensdauer zum Recycling an Motorola zurückgesandt werden.
Informationen zur Rücksendung von Produkten finden Sie unter http://
www.symbol.com/environmental_compliance.
Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada
taaskasutamise eesmärgil Motorola'ile. Lisainformatsiooni saamiseks toote
tagastamise kohta külastage palun aadressi: http://www.symbol.com/
environmental_compliance.
Español: Para clientes en la Unión Europea: todos los productos deberán
entregarse a Motorola al final de su ciclo de vida para que sean reciclados.
Si desea más información sobre cómo devolver un producto, visite: http://
www.symbol.com/environmental_compliance.
Français : Clients de l'Union Européenne : Tous les produits en fin de cycle
de vie doivent être retournés à Motorola pour recyclage. Pour de plus
amples informations sur le retour de produits, consultez : http://
www.symbol.com/environmental_compliance.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del
rispettivo ciclo di vita devono essere restituiti a Motorola al fine di
consentirne il riciclaggio. Per informazioni sulle modalità di restituzione,
visitare il seguente sito Web: http://www.symbol.com/
environmental_compliance.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Motorola
vállalathoz kell eljuttatni újrahasznosítás céljából. A termék
visszajuttatásának módjával kapcsolatos tudnivalókért látogasson el a http://
www.symbol.com/environmental_compliance weboldalra.
6
Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van
hun levensduur naar Motorola te worden teruggezonden voor recycling.
Raadpleeg http://www.symbol.com/environmental_compliance voor meer
informatie over het terugzenden van producten.
Português: Para clientes da UE: todos os produtos no fim de vida devem
ser devolvidos à Motorola para reciclagem. Para obter informações sobre
como devolver o produto, visite: http://www.symbol.com/
environmental_compliance.
Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei lor de
funcţionare, trebuie returnate la Motorola pentru reciclare. Pentru informaţii
despre returnarea produsului, accesaţi: http://www.symbol.com/weeelink.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe
vrniti podjetju Motorola za reciklažo. Za informacije o vraèilu izdelka obišèite:
http://www.symbol.com/environmental_compliance.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava
kierrätettäväksi Motorola-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja
tuotteen palauttamisesta on osoitteessa http://www.symbol.com/
environmental_compliance.
Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste
returneras till Motorola för återvinning. Information om hur du returnerar
produkten finns på http://www.symbol.com/environmental_compliance.
Service Information
If you have a problem using the equipment, contact your facility's
Technical or Systems Support. If there is a problem with the
equipment, they will contact the Motorola Enterprise Mobility
Support at:
http://www.symbol.com/contactsupport.
For the latest version of this guide go to:
http://www.symbol.com/support.
7
Advertisement
