Fingerprint Sensor Kit Installation - Panasonic JS-960WP Series Operating Instructions Manual

Fingerprint Sensor Kit Installation

Be sure to disconnect the power cable of the main block (POS Workstation) and
confirm the power is "OFF" before the operation below.
*Make sure to ground the unit before starting this work.
Fingerprint Sensor Kit (JS-960FPK010) contents
Fingerprint unit x 1
(1) Follow the steps for "MSR Unit (Short Type) Installation" in reverse, and remove the
MSR unit from the display unit.
(2) Remove the screws (2 locations).
(1)
34
Bottom case x 1
(2)
Screws
Cable x 1