Using The Stylus; Using Proximity, Msr, Or Barcode Reader - Unitech MT650 User Manual

Using the Stylus

CAUTION! Never use anything other than the MT650 stylus on the screen.
Using an object other than the stylus could cause permanent
damage.
1. Hold the stylus as you would hold a pencil.
2. To make a choice from a menu, lightly tap the tip of the stylus on that
choice.
3. Double-tap to open programs.
4. To write data into a field on a form, use the stylus to print the letters or
numbers.

Using Proximity, MSR, or Barcode Reader

The MT650 features an integrated proximity reader (EM125kHz, HID 125kHz
and 13.56MHz Mifare), MSR, and barcode reader which can read proximity
cards, magnetic stripe cards, and barcode labels respectively.
NOTE: Reading software must be enabled in order to operate the scanner.
This can be a user-loaded application or a pre-loaded utility such as
Scanner Setting.
Copyright 2011 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
11