Video Adjustment For Specific Area - Pioneer XV-DVR9H Service Manual

5

7.1.8 VIDEO ADJUSTMENT FOR SPECIFIC AREA

QQ
3 7 63 1515 0
Purposes: Depending on the area, jitter may appear in a picture received by the tuner, as conditions of signals received by
the tuner are different from area to area. To correct this kind of problem, the function of the System Codec AVIO
control section for adjusting signals received by the tuner can be used.
How to enter setting modes: To enter General Setting mode, press the ESC key then the CHP/TIM key of the remote
control
How to exit setting modes: Press the ESC key. The setting mode is exited, the OSD disappears.
1. General Setting mode
This mode can be entered only during recording/playback stop. In this mode, each item and its current settings are displayed on the OSD.
The currently selected input mode (TUNER or LINE) is displayed. If L1, L2, L3 or DV is selected for input, general settings for the line
input can be made, and if TUNER is selected, general settings for the tuner input can be made.
[General Setting mode]
Table 1: Key operations in General Setting mode
Key
INPUT SELECT,
TE
L 13942296513
CHANNEL +/– (∗R) (∗2)
[SIDE A], [SIDE B] (∗1)
[Rev ×3], [×3 Fwd]
(∗1)
[Rev CHAPTER SKIP]
[CHAPTER SKIP Fwd]
(∗1)
[Rev SCAN],
[SCAN Fwd] (∗1)
[Rev STILL STEP],
[STILL STEP Fwd] (∗1)
[SPEED +], [SPEED -] (∗1) HD Err Det
www
CLEAR (∗1)
ESC
.
∗R: Refers to keys on the remote control unit supplied with this unit. The keys without "R" refer to the remote control unit for service.
5
http://www.xiaoyu163.com
6
unit for service. To enter Specific Channel Setting mode, press the DIG/ANA key in General
Setting mode.
(A picture from the tuner can be viewed using the semitransparent OSD display.)
Operation
Switches inputs or channels.
Sets Sync AGC.
Sets Threshold level.
Sets Threshold level.
Sets V-Sync Det.
Sets Std Det.
Initializes the setting of General
Setting mode.
x ao u163
y
Exits AVIO setting for specific areas,
i
clearing the OSD. (Tuner screen appears)
6
http://www.xiaoyu163.com
7
2 9
8
∗ : setting is the default.
(effective only during recording/playback stop)
Setting (∗: Default)
Q Q
3 6 7 1 3 1 5
TUNER / LINE
ON (∗) / OFF
(∗) Normal
Auto Threshold Level
Manual Threshold Level
Pedestal Level
According to the setting of Threshold,
the values can be changed within the
range mentioned below.
• Normal:
The value is fixed, with no display of
the value.
• Auto Threshold Level:
0-8 (Default: 0)
• Manual Threshold Level:
0-8 (Default: 0)
• Pedestal Level:
0-8 (Default: 0)
Normal (∗) /Short/Long
Normal (∗) /Non STD
Normal (∗) /Fast/Stop
–
co
–
.
XV-DVR9H
7
8
9 4 2 8
Remarks
0 5 8 2 9 9 4 2 8
–
–
–
–
–
–
–
–
–
–
Pressing the key resets all settings
(1-3 of Table 2) of General Setting
m
mode to the initial values. Settings
of Specific Channel Setting mode
are not affected (they are retained).
–
9 9
A
B
C
9 9
D
E
F
123
8