Grundig Cinemo DR 5400 DD User Manual page 43

OTHER MODES
RDS
ENERGY
PTY SEARCH
CLASSICS
Searching for RDS stations
1 To search for an RDS station, press »
until »RDS« appears in the display indicating that an RDS
station is being received.
– After a short time the station name sometimes appears if the
reception is sufficiently strong.
Note:
It may take some time before all the RDS information is avail-
able.
Calling up RDS information
If an RDS station is being received, various station information can
be called up in the display.
Press »RDS« repeatedly.
1
– The display shows the waveband with the preset position and
frequency, station type, radio ticker text, the station name,
and then the waveband again with the preset position and
frequency.
Searching for station types (PTY)
1 Press » PTY SEARCH« to call up the PTY search function.
S
– Display: »PTY SEARCH«.
– If no station type code is transmitted, »NO PTY« appears in
the display.
Select other station types by pressing »
2
» s
PTY +«.
3 Press »OK« to start the PTY search.
– If the station type cannot be found, the following ticker text
message appears: »NOT FOUND«.
– If the station type is found, the frequency appears in the dis-
play and the desired station type can be heard.
_____________________________________
m « or »
a
, « repeatedly
–« or
PTY
43