Automatic Channel Assignment - E-Mu PX-7 Owner's Manual

Press Play to begin recording.
4.
Play the Keypads (or keyboard). Notes now repeat according the Input
5.
Quantize setting.
• You can change the Input Quantize setting at any time while recording.

Automatic Channel Assignment

Whenever you change a channel, the sequencer looks for a track that is
assigned to that channel. This feature automatically selects the proper track
in most cases, freeing you from having to think about it.
For your information, the algorithm works as follows:
If the current track is already assigned to this channel, or if this track is
1.
a "multi" track containing this channel (i.e. MultiA if channel was set
to 07A) it does not change the current track.
If not, it starts at track 1 and looks for a track that is assigned to this
2.
exact channel, and sets it to the first track that is.
If there wasn't one, again it starts at track 1 and looks for a "multi" track
3.
that contains this channel, and sets it to the first track that does.
If none of the above succeed (meaning that this channel is not being
4.
played on any track), it does not change the current track.
Also, changing the track in the list editors or channel assignment screens
sets the current track and vice versa.
Sequencer
Pattern Mode
PX-7 Owners Manual 61