Local Control On/Off - E-Mu PX-7 Owner's Manual

Local Control On/Off

Curve 1
Played Pressure
Curve 3
Played Pressure
Local Control is used to disconnect the controllers (knobs, footswitches)
from the sound generating section. Even though disconnected from the
internal synthesizer, the keypad and controllers are still transmitted over
MIDI. Local Control is normally turned Off when recording into an
external MIDI sequencer (set sequencer to Echo Thru). Played data and
recorded data are merged in the computer sequencer and then sent back to
the module. This feature can also be used if you want to control another
MIDI sound generator from the rubber keypads without playing internal
sounds.
LOCAL CONTROL
on
MIDI local control mode change messages can either be accepted or
ignored depending on the setting of the change field. With this set to
"ignored", an incoming command to turn local control on or off would be
ignored.
Controllers Menu
Local Control On/Off
Curve 2
Linear
Played Pressure
Curve 4
Played Pressure
CHANGE
ignored
PX-7 Owners Manual 135