KingsBottle KBU-55 SERIES User Manual
Compressor beverage cooler
Hide thumbs
Also See for KBU-55 SERIES:
- User manual (13 pages) ,
- User manual (16 pages) ,
- User manual (12 pages)
Related Manuals for KingsBottle KBU-55 SERIES
Summary of Contents for KingsBottle KBU-55 SERIES
-
Page 1: User Manual
USER MANUAL KBU-55, KBU-56, KBU-57, KBU-328 SERIES BEVERAGE COOLER LAE controller from Italy KBU-55 KBU-56 KBU-328 COMPRESSOR BEVERAGE COOLER www.kingsbottle.com... - Page 2 CONGRATULATIONS CHAPTER CONTENTS PAGE Congratulations and thank you for choosing our KingsBottle Beverage Coolers . We are Part I Important Safety & Pre-Use Instructions sure you will find your new appliance a pleasure to use . Before you installing and...
- Page 3 Don’t put the refrigerator in frosty or unprotected areas like a garage or on the verandah. www.kingsbottle.com in the built-in structure, clear of obstruction. Keep the refrigerator out of direct sunlight.
- Page 4 F ro n t V e n tila tion B ase 6 -A d ju sta b le F eet C o n tro l P a n e l a n d T e m p e ra ture S ettings D o or www.kingsbottle.com...
-
Page 5: Installation Instructions
COMPRESSOR BEVERAGE COOLER nd away from heating appliances. www.kingsbottle.com re that installation allows for unit to be removed if as condenser will need periodic cleaning and also... - Page 6 This unit comes with an optional key lock. The keys are located inside the plastic bag that contains the user manual. To unlock the door, insert the key into the lock and turn counterclockwise. To lock the door, simply reverse the operation making sure the metal pin is engaged completely. Then remove the key and place it is a secure place for safekeeping. www.kingsbottle.com...
- Page 7 Door open alarm INFO MENU The information available in this menu is: Instant probe 1 temperature Minimum probe 1 temperature recorded Instant probe 2 temperature Compressor working weeks Maximum probe 1 temperature recorded Keypad state lock COMPRESSOR BEVERAGE COOLER www.kingsbottle.com...
- Page 8 By keeping button pressed, use button to set the desired value. When button is released, the newly programmed value is stored and the following parameter is displayed. • To exit from the setup, press button or wait for 30 seconds. • www.kingsbottle.com...
- Page 9 Fan stop delay after compressor stop. See Fig. 2. 0...30min Timed fan stop. With FT2=0 the fans remain on all the time. 0...30min Timed fan run. With FT3=0, and FT2 > 0, the fans remain off all the time. COMPRESSOR BEVERAGE COOLER www.kingsbottle.com...
- Page 10 ST1, the probes must be the LAE models ST1... -12.5..12.5°C Probe T1 offset. NO/YES Probe T2 enabling (evaporator). -12.5..12.5°C Probe T2 offset. 1...30 min Delay for minimum temperature (TLO) and maximum temperature (THI) logging. 0...100 Display slowdown. 1...255 AD3-5 address for PC communication. www.kingsbottle.com...
- Page 11 LED readout for the first few hours of operation. After a few hours of operation, the temperature will normalize to the displayed temperature. COMPRESSOR BEVERAGE COOLER www.kingsbottle.com...
- Page 12 To adjust shelving, clips can be moved, place ‘top’ part of clip in first then force bottom part up. If clips seem loose, remove and ‘expand the width of opening on clip, this will allow it to fit better. PLEASE NOTE Before modifying your cabinet’s original configuration in any way, be sure to ask your dealer for advice. www.kingsbottle.com...
- Page 13 3. Keep the cooler stocked, an empty cooler will run longer, believe it or not. accelerate the defrosting process, other than those recommended by the manufacturer. per 8g of refrigerant. The amount of refrigerant charged in the appliance can be found on the rating plate on the appliance. COMPRESSOR BEVERAGE COOLER www.kingsbottle.com...
- Page 14 Have you turned the ‘Heated Door Function’ ON? located next to the Condensation is forming on outside of glass door temperature controller. You shouldn’t have condensation on glass with these models if this function is ON. www.kingsbottle.com...
-
Page 15: Technical Data
143.3Lbs (65Kgs) 180.7Lbs (82kgs) 286.6Lbs (130kgs) 23.4”W x 21.5”D x 32.3”H 35.4”W x 21.5”D x 33.9”H 52.6”W x 21.5”D x 33.9”H DIMENSION (595W x545D x820H mm) (900W x545D x860H mm) (1335W X 545D X 860H mm) COMPRESSOR BEVERAGE COOLER www.kingsbottle.com... - Page 16 Limited warranty – 90 day replacement plan with a free 9 months upgrade, totaling 1 year, on parts and labor from the date of shipment. For customer service, please contact BTO AMERICA LIMITED by e-mail ( service@kingsbottle.com) The limited warranty does not cover: Damage due to such things as accident, misuse, abuse, mishandling, neglect, unauthorized repair or any other cause beyond the control of the seller whether similar or dissimilar to the foregoing.
Need help?
Do you have a question about the KBU-55 SERIES and is the answer not in the manual?
Questions and answers