Honda 1991 Accord Wagon Owner's Manual page 8

Seats
Front Seat
Adjust the seat position by pulling up on the adjustment lever under
the front edge of the seat cushion, and sliding the seat to the desired
position. Then release the lever and make sure the seat is locked in
position by moving it back and forth.
Pull up
The angle of the seat-back can be changed by pulling up on the lever
at the outside edge of the seat and leaning forward or back. Release
the lever and let the seat lock into place when it reaches the desired
angle.
Seat belts are most effective when the driver and passengers are
sitting up straight and well back in each seat.
Do not adjust the driver's seat while the car is moving; the seat
could move suddenly, causing loss of vehicle control.
To reduce the risk of sliding under the seat belts in a collision,
the seat-backs should be reclined no more than is necessary for
comfort.
Driver's Lumbar Support
(US: EX, CANADA: EX-R)
To adjust for more or less support of the
driver's lower seat-back cushion, turn
the knob on the inner side of the
seat-back.
Do not try to adjust the lumbar
support while driving. Make the adjustment
while sitting in your normal driving
position before driving away.
Pull up