Table of Contents
Advertisement
Appearance Care (cont'd)
Rust Prevention
Rusting is likely to occur in parts of the car where water is trapped
or where there is continual dampness.
Water will collect inside doors and body panels if drain holes
become clogged.
Water which seeps under or soaks floor mats will subject floor
sections to prolonged wetness or dampness.
Road dirt or sand, which collects and fills recesses on the underside
of the car, retains moisture long after the rest of the car has dried.
The removal of paint and undercoating by stones, gravel, and minor
accidents immediately exposes metal to air and moisture.
Rusting is increased by high humidity and by the presence of
corrosive substances in the air or on the roads.
Salt used for road de-icing will coat the bottom of the car and hasten
rusting.
Localities with high humidity have greater potential for rust
problems, especially where salt is also present on the road or in
moist sea air.
Industrial pollution will accelerate the deterioration of paint
finishes and promote rusting.
Preventive Service
Check all drain holes in the doors and body panels for clogging and
clear if necessary. When washing your car, also clean the underside
of the car by using high pressure water;
inside front fender,
housing, and
After washing your car or after heavy rain, check for interior leaks.
Dry all wet areas. Have leaks repaired as soon as possible.
rear suspension,
under rear bumper.
above subframe,
inside rear wheel
Advertisement
Table of Contents
