Connecting The Fm Antenna; Connecting The Am (Mw/Lw) Antenna - JVC CA-D752TR Instructions Manual

CAUTION: Make all connections before plugging the Unit into an AC power outlet.
A
B
CAUTION: To avoid noise, keep antennas away from metallic parts of the System, connecting
cord and the AC power cord.
ANTENNA
GND
AM LOOP
AM EXT
FM 75
COAXIAL
1 2
4

Connecting the FM Antenna

A. Using the Supplied Wire Antenna
B. Using the Standard Type Connector
ANTENNA
FM Wire Antenna
GND
AM LOOP
AM EXT
If reception is poor,
connect the outside
FM 75
antenna.
COAXIAL
Outside FM Antenna Wire

Connecting the AM (MW/LW) Antenna

AM Antenna Wire (not supplied)
Note: Even when
connecting an outside AM
antenna,
keep the indoor AM loop
connected.
AM Loop Antenna
3
The FM Wire Antenna provided can be connected to a FM 75-ohm
COAXIAL as temporary measure.
Extend the supplied wire antenna horizontally.
(Not Supplied)
A standard type connector (IEC or DIN 45325) should be connected to
the FM 75-ohm COAXIAL terminal.
Before attaching a 75-ohm coaxial lead (the
kind with a round wire going to an outside
antenna), disconnect the supplied FM Wire
Antenna.
If reception is poor, connect the outside antenna.
Turn the loop until you
have the best reception.
Snap the tabs on the
loop into the slots of
the base to attach the
AM Loop.