Table of Contents
Advertisement
SETUP & OPERATION MANUAL
FEATURES
Tables can be adjusted up or down for full
belt use.
Front table can be inclined left or right.
Innovative hinged dust hood accommo-
dates oversized stock.
Easy adjustment of abrasive belt tension
with one knob only.
Graphite backing reduces belt friction for
longer belt life.
Single knob tracking control.
Auxiliary table allows curved sanding.
Heavy steel base ensures a solid stable
platform while sanding.
Dynamically balanced 7'' rubber drive
roller and crowned 3'' idler roller to ensure
solid belt tracking.
Magnetic 2-step safety switch to prevent
unwanted or unintentional start-up is
equipped with an extra-large easy access
stop panel and a lock-out key to prevent
unauthorized use of the sander.
SPECIFICATIONS
BELT SIZE
6" X 108" (152 x 2743 MM)
FRONT TABLE SIZE (L X W)
7 3⁄4" x 37'' (197 x 940 MM)
AUXILIARY TABLE SIZE (L X W)
11 3⁄4" x 19'' (299 x 483 MM)
DUST CHUTE OUTLET
4" (102 MM)
BELT SPEED
3150 FPM
BASE DIMENSIONS (L X W)
42" x 16 1⁄2" (1067 x 419 MM)
MOTOR
M1 2 HP , 220 V, 1 PH, 14 A
M2 2 HP , 220 V, 3 PH, 6 A
M3 2 HP , 600 V, 3 PH, 2.5 A
WEIGHT
462 LBS (210 KG)
6" X 108" VERTICAL EDGE BELT SANDER
MODEL
# 15-010 M1
VERSION 2_REVISION 1 - JUNE 08/10 (19115210)
© Copyright General® International 06/2010
Advertisement
Table of Contents
Related Manuals for General 15-010 M1
Summary of Contents for General 15-010 M1
-
Page 1: Specifications
M2 2 HP , 220 V, 3 PH, 6 A M3 2 HP , 600 V, 3 PH, 2.5 A WEIGHT 462 LBS (210 KG) # 15-010 M1 VERSION 2_REVISION 1 - JUNE 08/10 (19115210) © Copyright General® International 06/2010... - Page 2 GENERAL® INTERNATIONAL 8360 Champ-d’Eau, Montreal (Quebec) Canada H1P 1Y3 Telephone (514) 326-1161 • Fax (514) 326-5555 • www.general.ca THANK YOU for choosing this General ® International model 15-010 6" X 108" Vertical Edge Belt Sander. This sander has been carefully tested and inspected before ship- ment and if properly used and maintained, will provide you with years of reliable service.
- Page 3 2 years (24 months) from the date of purchase. General® and General® International agree to repair or replace any part or component which upon examination, proves to be defective in either workmanship or material to the original purchaser during this 2-year warranty period, subject to the “conditions...
-
Page 4: Table Of Contents
TABLE OF CONTENTS SAFETY RULES ..... . . MAINTENANCE ..... . . -
Page 5: Rules For Safe Operation
To help ensure safe operation, please take a moment to learn the machine’s applications and limitations, as well as poten- tial hazards. General® International disclaims any real or implied warranty and holds itself harmless for any injury that may result from improper use of its equipment. -
Page 6: Electrical Requirements
ELECTRICAL REQUIREMENTS BEFORE CONNECTING THE MACHINE TO THE POWER SOURCE, VERIFY THAT THE VOLTAGE OF YOUR POWER SUPPLY CORRESPONDS WITH THE VOLTAGE SPECIFIED ON THE MOTOR I.D. NAMEPLATE. A POWER SOURCE WITH GREATER VOLTAGE THAN NEEDED CAN RESULT IN SERIOUS INJURY TO THE USER AS WELL AS DAMAGE TO THE MACHINE. IF IN DOUBT, CONTACT A QUALIFIED ELECTRICIAN BEFORE CONNECTING TO THE POWER SOURCE. -
Page 7: Identification Of Main Parts And Components
6" X 108" VERTICAL EDGE BELT SANDER 15-010 M1 IDENTIFICATION OF MAIN PARTS AND COMPONENTS SANDING BELT TRACKING ADJUSTMENT END GUARD/DUST HOOD KNOB MOTOR ASSEMBLY SANDING BELT TENSION ADJUSTMENT ON/OFF SWITCH KNOB FRONT TABLE HEIGHT ADUSTMENT KNOB AUXILIARY TABLE FRONT TABLE HEIGHT LOCK KNOBS... -
Page 8: Basic Functions
Carefully unpack and remove the sander and its components from the shipping crate and check for damaged or missing items as per the list of contents below. Note: Please report any damaged or missing items to your General International distributor immediately. LIST OF CONTENTS SANDER ................1... -
Page 9: Placement Within The Shop / Establishinga Safety Zone
PLACEMENT WITHIN THE SHOP / ESTABLISHING A SAFETY ZONE PLACEMENT WITHIN THE SHOP This machine should be installed and operated only on a solid, flat and stable floor that is able to support the weight of the sander (453 lbs - 206 kgs) and the operator. Using the dimensions shown as a guideline, plan for pla- cement within your shop that will allow the operator to work unencumbered and unobstructed by foot traffic... -
Page 10: Assembly Instructions
ASSEMBLY INSTRUCTIONS SERIOUS PERSONAL INJURY COULD OCCUR IF YOU CONNECT THE MACHINE TO THE POWER SOURCE BEFORE YOU HAVE COMPLE- TED THE INSTALLATION AND ASSEMBLY STEPS. DO NOT CONNECT THE MACHINE TO THE POWER SOURCE UNTIL INSTRUCTED TO DO REPOSITION THE AUXILIARY TABLE MOUNTING BRACKET REAR FACE VIEW Unscrew the upper bolt using the supplied 14... -
Page 11: Install The Dust Hood/End Guard
1100 CFM. If you do not already own a dust collection system consider contacting your General® International dis- tributor for information on our complete line of dust collection systems and accessories or visit our Web Site at www.general.ca. -
Page 12: Magnetic Safety Switch
ON/OFF MAGNETIC POWER SWITCH This model 15-010 M1 is equipped with a Magnetic 2-step safety switch to prevent unwanted or unintentional start-up and unauthorized use of the saw. The switch assembly is equipped with a GREEN “START” button A, an extra-large easy access RED stop panel B, and a lock-out key C. -
Page 13: Front Table Inclination Adjustment
FRONT TABLE INCLINATION ADJUSTMENT The front table can be inclined left or right for sanding irregular workpieces. 1. Loosen the two lock knobs and raise or lower one end of the table by hand either left or right 2. Re-tighten the lock knobs to lock the table in position. AUXILIARY TABLE HEIGHT ADJUSTMENT Adjusting the height of the auxiliary table allows an even wearing of the sanding belt surface by allowing you to... -
Page 14: Maintenance
REQUIRED MAINTENANCE REPLACEMENT OF THE SANDING BELT Sanding belt should be replaced when worn out. Standard size (6" by 108") replacement belts can be purchased in a variety of grits from your General® International dealer under the following parts numbers: •... -
Page 15: Replacement Of The Graphite Coating On The Platen
AUXILIARY TABLE UNDERSIDE VIEW Unscrew and remove the two lock knobs 4. Loosen the two lock nuts , then turn the tension adjustment knob then remove the top cover clockwise until the sanding belt is loose enough to be removed. Tip: To extend belt life and avoid premature breakage, take note AUXILIARY TABLE UNDERSIDE VIEW of the direction arrows... -
Page 16: Steel Platen Adjustment
STEEL PLATEN ADJUSTMENT The steel platen should protrude 1/8” to 1/4” (approx.) past the motor drive roller and idle roller in order to be in complete contact with the abra- sive belt. The steel platen is initially set at the factory but, due to vibrations, over time, may need to be re-adjusted. -
Page 17: Recommended Optional Accessories
RECOMMENDED OPTIONAL ACCESSORIES Here are some of the optional accessories available from your local General International dealer. For more information about our products, please visit our website at www.general.ca SANDING BELTS DUST COLLECTORS STANDARD SIZE Dust collectors contribute to (6" BY 108") -
Page 18: Parts List And Diagrams
DIAGRAM... - Page 19 PARTS LIST 15-010 PART NO. DESCRIPTION SPECIFICATION 15010-01 AUXILIARY TABLE 15010-02 END STEEL PLATE 15010-03 SELF-TAPPING SCREW 15010-05 TABLE MOUNTING BRACKET 15010-06 LOCK KNOB 1/2”-12NCX25X61 15010-07 WASHER 3/8”X20X2 15010-08 HEX HEAD BOLT 3/8”-16NCX2-1/2” 15010-09 ADJUSTMENT KNOB 15010-10 SPRING HOLDER 15010-11 HEX HEAD BOLT 15010-12 HEX NUT...
- Page 20 PARTS LIST 15-010 PART N0. DESCRIPTION SPECIFICATION 15010-63 FLAT WASHER 15010-64 POWER CORD 15010-65 MOTOR CORD 15010-66 WARNING LABEL 15010-67 WARNING LABEL 15010-68 NAME PLATE 15010-70 STRAIN RELIEF 15010-71 LABEL 15010-72 STOP 15010-73 HEX HEAD BOLT 5/16”-18UNCX2-1/2” 15010-74 WASHER 5/16”X23X2T 15010-75 HEX NUT 5/16”-18UNC...
- Page 21 Notes...
-
Page 22: Contact Information
MODEL 15-010 M1 8360 Champ-d’Eau, Montreal (Quebec) Canada H1P 1Y3 Tel.: (514) 326-1161 Fax: (514) 326-5565 - Fax: (514) 326-5555 - Parts & Service / Order Desk orderdesk@general.ca www.general.ca IMPORTANT When ordering replacement parts, always give the model number, serial number of the machine and...
Need help?
Do you have a question about the 15-010 M1 and is the answer not in the manual?
Questions and answers