Connecting An External Monitor - Fujitsu CELSIUS H730 Operating Manual

Connecting external devices

Connecting an external monitor

An analogue monitor is connected to the analogue VGA monitor port, a digital monitor to the
DisplayPort or to the DVI-D monitor port (see overview below). Monitor output is limited to a maximum
of two monitors at any one time (see
Monitorport Monitorport VGAconnection socket Monitor
Digital DisplayPort (on the device and on the
optional Port Replicator)
Digital DVI-D monitor port (on the optional Port
Replicator only)
► Switch off the notebook and the external monitor.
► Plug the data cable of the external monitor into the monitor port.
► First switch on the external monitor and then the notebook.
You can also switch between the external monitor and the LCD monitor of the
notebook, see chapter
You can display the same picture on the external monitor and the
notebook LCD monitor simultaneously.
56
"Key combinations", Page
Analogue VGA monitor port (on the device and
on the optional Port Replicator)
"Key combinations", Page
24, section "Toggle output monitor").
24.
Fujitsu