Table of Contents
Advertisement
Working with the notebook
Removing a SIM card
► Prepare for removal of the SIM card, see chapter
2
► Complete the removal, see chapter
Wireless LAN/Bluetooth/UMTS/LTE radio components
The installation of radio components not approved by Fujitsu Technology Solutions
will invalidate the certifications issued for this device.
Switching the wireless components on and off
► Press the
The radio component indicator will be illuminated when one or more
radio components is switched on.
If you switch off the radio components, the wireless LAN antenna and the
Bluetooth and UMTS/LTE module will also be switched off.
You can enable and disable the installed radio components individually
using the WirelessSelector programme
Pay attention to the additional safety notes for devices with radio components
provided in the "Safety/Regulations" manual.
Details on using Wireless LAN can be found in the online help system
included in the Wireless LAN software.
You can find more information on how to use Bluetooth on the CD you
received with your Bluetooth software.
You can obtain more information on UMTS/LTE from your service provider.
40
1
button to start the WirelessSelector.
"Preparing to remove components", Page
► Pull the SIM card slider tray from the slot (1).
► Remove the SIM card (a) from the
SIM card slider tray.
a
► Push the SIM card slider tray back
into the slot (2).
"Finishing component removal", Page
61.
66.
Fujitsu
Advertisement
Table of Contents
