Honda Civic Si 2005 Owner's Manual page 145

Replacing Rear Bulbs
1. Open the hatch.
Remove the cover from the inside
2.
panel by carefully prying on its
upper front edge with a small flat-
tipped screwdriver.
COVER
3. Determine which bulb, stop/
taillight, back-up light, or turn
signal is burned out.
4. Remove the socket for that bulb
by turning it one-quarter turn
counterclockwise.
5. Remove the burned out bulb from
the socket by pushing it in and
SOCKET
turning the bulb counterclockwise
until it unlocks.
6. Install the new bulb in the socket.
7. Reinstall the socket in the taillight
assembly and turn it clockwise to
BULB
lock it in place.
8. Test the lights to make sure the
new bulb is working. Reinstall the
cover over the taillight assembly.
Lights
149