Table of Contents
Advertisement
Power requirements
Operating temperature
Accessories operating temperature
Connectors
WAP (CMD-J6 only)
Email
Supplied accessories
Optional accessories
NOTE
This device contains electrostatically sensitive components. Damage can occur to these components
if the appropriate handling is not adhered to.
ESD Handling precautions:
A working area in which Digital Cellular Telephones may be safely handled without undue risk of
damage from electrostatic discharge must be available.
The area must be equipped as follows:
! All working surfaces must have a dissipative bench mat, safe for use with live equipment,
connected via 1.2M
! A quick release skin contact device with a flexible cord, which has a built-in safety resistor of
a range between 5.2K
dissipative earth point.
! All containers and storage must be of the conductive type.
3.7 V (nominal)
-10°C to +55°C
± 0°C to +45°C
External RF connector
Bottom Connector (12-pin flat I/O connector)
Mini plug head set jack
Supported protocols by the WAP v.1.1 compliant browser:
Wireless Session Protocol (WSP)
Wireless Caching Model
Wireless Transaction Protocol (WTP)
Wireless Control Message Protocol (WCMP)
Wireless Markup Language (WML)
Wireless Markup Language Script (WMLS)
Wireless Bitmap (WBMP)
Wireless Transport Layer Security (WTLS Class1)
Wireless Telephony Application Interface (WTAI)
Supported by the e-mail protocols:
SMTP
POP 3
AC Adapter
Battery (std.)
Battery (extd.)
HFK Main Unit
HFK Cradle
Cigar Lighter Charger
Data Cable RS
Data Cable USB
Mobile Data Software
Headset
Travel Charger
Ω
resistor to a common ground point.
Ω
Ω
and 1.2M
shall be used. The flexible cord must be attached to a
QN-J6BPS
QN-J6BPE
QN-3HFK
QN-J5CH
QN-3CC
QN-3RS
QN-3USB
QN-3DS
QN-3HS
QN-3TC
2
Advertisement
Table of Contents
