JVC 0405AIMMDWJEM Instructions Manual page 41

Searching for a program by PTY codes
One of the advantages of the RDS service is that
you can locate a particular kind of program from
the preset channels (page 33) by specifying the
PTY codes.
To search for a program using the PTY codes
NOTE
Before you start operation;
• The PTY Search is only applicable to preset
stations.
• To stop searching any time during the process,
PTY SEARCH
press while searching.
• There is a time limit in doing the following steps. If
the setting is canceled before you finish, start from
1
step again.
1
Press PTY SEARCH while
listening to an FM station.
S V C DV D - A
"SELECT PTY" flashes on the display
window.
• While "SELECT PTY" is flashing:
2
Press PTY SELECT + or PTY
SELECT – until the PTY code
you want appears on the display
window.
S V C DV D - A
• For details, see "Description of the PTY codes"
(page 36).
• While the PTY code selected in Step
the display window:
3
Press PTY SEARCH again.
S V C DV D - A
S V C DV D - A
While searching, "SEARCH" and the selected
PTY code alternate on the display window.
The system searches 30 preset FM stations,
stops when it finds the one you have selected,
and tunes in that station.
To continue searching after the first stop
Press PTY SEARCH again while the indications
on the display window are flashing.
If no program is found, "NOT FOUND" appears on
the display window.
Listening to radio
2
is still on
35