Table of Contents
Advertisement
Using the Tuner
Numeric
Keys
SET
2
RDS DISPLAY
PTY SEARCH
PTY SELECT +/–
TA/News/Info
* When the System is in use, the display shows other items as well.
You can listen to FM and AM (MW) stations. Stations can
be tuned in manually, automatically, or from preset memory
storage.
❑ Before listening to the radio:
• Make sure that both the FM and AM (MW) antennas
are correctly connected. (See pages 5 and 6).
One Touch Radio
Just press the FM/AM button on the Remote Control to turn
on the System and start playing the station you were last
tuned to.
❑ You can switch from any other sound source to the radio
by pressing the FM/AM button.
Tuning In a Station
1
Press the FM/AM button.
The Band and Frequency you were last tuned to appear
on the display.
(If the last station was selected using the preset number,
the preset number appears first.)
Each time you press the button, the band alternates be-
tween FM and AM (MW).
• You can also select the band by turning the Source
selector on the Unit.
(On the Remote Control)
5
3
∞
FM/AM
FM/PLAY MODE
RDS indicator
Band display, Preset channel,
Frequency display
For simplicity, we show here only the items described in this section.
(On the Unit)
Source
selector
Program type indicator
FM mode indicator
2
Select a station using one of the follow-
ing methods.
G Manual Tuning
Press the ¢ or 4 button on the Unit or the
∞
button on the Remote Control repeatedly to move
from frequency to frequency until you find the station
you want.
G Auto Tuning
If you press and hold the ¢ or 4 button on the
Unit or the
for one second or more, the frequency changes up, or
down, automatically until a station is found.
G Preset Tuning using the Remote Control
(Possible only after presetting stations)
Select the desired preset number using the
button on the Remote Control. The display will show
the preset number's band and frequency.
• You can also select the desired preset number
using the Numeric Keys. See "Entering the
Number with the Remote Control" on page 11.
(e.g. Press +10, and then 2 for number 12.)
Example:
Press the
pears.
UP
3
OR
5
∞
or
button on the Remote Control
OR
3
button until the preset number "2" ap-
Preset number
DOWN
3
or
Multi-control
button
¢
4
5
or
3
2
or
12
Advertisement
Table of Contents
