Panasonic SC-H M900 Service Manual page 14

SC-HM900
I
8.3 Disassembly and assembly of the Traverse Unit
~
Step 1 Place the traverse unit as shown.
Step 2 Press in the lever shaft in the direction of arrow 1 as
shown and push the traverse unit into the position in the direc-
tion of arrow 2.
Step 1
Step 2
Push the lever from position A to B.
Pull the stopper (black) in the direction of arrow 1 and
push the lever in the direciton of arrow 2.
Push the stepeer (black) down until the white lever
eject out.
Step 3
Step 4 Lift up the traverse unit and slide out the unit as shown.
.
Replacement 01 Traverse Unit
1t
Step 3 Pull the stopper in the direction of arrow 1 and
release the lever in the direction of arrow 2 as shown.
~
"""'"
'---'"
Step 4 Pull out the tray half way and push it back fully.
....
....
""'"
Step 5 Push the lever to the initial position indicated "ln_I".
,-.,.
'---~
- 14 -