Connect Your Device - Fortinet FortiWiFi 60CM-3G4G Quick Start Manual

2. Connect Your Device

To attach the antennae to the back and front of the FortiWiFi unit, insert the antenna
base firmly into the appropriate antenna mount (see labels on the antennae), and
then tighten the fastening collar securely.
To attach your unit to a wall, refer to the wall mount template.
Ensure the FortiWiFi unit is placed on a stable surface. Connect the following to the
FortiWiFi unit:
1. Connect an Ethernet cable into the port labeled WAN1.
2. Connect the other end of your Ethernet cable to your Internet connection.
3. Connect an Ethernet cable to each workstation or laptop PC you wish to connect
to the FortiWiFi unit.
4. Connect an RJ-11 telephone cable to the MODEM port.
5. Connect the Power Supply to the FortiWiFi unit and plug the cable into an electrical
outlet.
3G-1 4G-1
MODEM WIFI 3G/4G
FortiWiFi 60CM-3G4G
PWR STATUS HA
CONSOLE
WiFi
DC+12V USB MGMT USB DMZ
5
INTERNAL WAN1 WAN2 DMZ
LINK/ACT
SPEED
1 2 3 4 5
WAN2 WAN1 5 4 3
1
3
2
4G-2 3G-2
4
WiFi
2 1 MODEM
RJ-11
3
Phone Jack