Using Surround Modes - JVC RX-664VBK Instructions Manual

Using the Surround Processor

Using Surround Modes

Once you have adjusted the surround mode you can use the same adjustments every
time you want to enjoy Surround modes.
From the front panel:
1. Press SURROUND so that the Control % % % % % / fi fi fi fi fi buttons
work for selecting the Surround Processor mode.
The lamp above the button lights up.
2. Press Control % % % % % / fi fi fi fi fi to select one of the Surround
mode ("PROLOGIC," "3CHLOGIC" or
"THEATER").
Each time you press the button, the Surround Processor
modes change as follows:
PROLOGIC
Ex.
OFF
* As for the 3D-PHONIC modes (see page 27) and the
DAP modes (see page 29), one of the previously
selected mode appears on the display.
3. Select and play a sound source which was processed with Dolby Surround and
is labeled with
DOLBY SURROUND
To cancel Surround mode
Select "OFF" in step 2 above.
From the remote control:
1. Press SOUND CONTROL so that 10 keys work for
adjusting the sound.
2. Press SURROUND until the mode you want appears
on the display.
The previous mode is recalled (with its previous
settings) and is shown on the display.
The indicator for that mode also lights up on the display.
Each time you press the button, the surround modes
change as follows:
THEATER
3. Select and play a sound source which was processed with Dolby Surround and
is labeled with
DOLBY SURROUND
To cancel surround mode
Select "OFF" in step 2 above.
37
THEATER 3CHLOGIC
3DACTION* PAVILION*
mark.
3CHLOGIC PROLOGIC
OFF
mark.
SURROUND
Note:
When one of the surround modes
is selected, the corresponding
indicator lights up on the display.
SOUND
CONTROL
SURROUND
3