Replacing Gobos - PR SOLO 575 User Manual

ROTATING GOBO
SPRING
ROTATED GOBO WHEEL
Lock Tilt.
Free 2 latch catches on the cover and slip off the front cover. You could see the structure as shown in
the above figure.
For gobos replacement on the rotated gobo wheel: take an appropriate tool to tug up spring and take
out the rotating gobo with its holder; tug the head of retaining spring up and engage your another
hand to take the retaining spring out; take the gobo out; fit a new gobo and fit the retaining spring; fit
the gobo holder. Notes: the gobo cannot be touched with bare hand; be careful of the gobo when the
replacement is underway and don't drop it.
Close the front cover and fasten 2 latch catches.
Pan's belts
Free 2 screws on Pan assembly's maintenance
door and open the door; change the belts; close
the door and fasten the screws.
Tilt's belts
The common users replacing the belts is not recommended.

REPLACING GOBOS

RETAINING SPRING
ROTATED GOBO WHEEL
CHANGING BELTS
11/24
GOBO
Base
GOBO HOLDER
Screws
Open the door
Solo 575 Manual_en.doc