Download Print this page

Ideaboard Interactive whiteboard User Manual page 3

Portable

Advertisement

1. Safety Information (Continue....)
Do not defeat the purpose of the grounding (earthing) plug (for example, do not use a conversion plug).
Always plug the power cord, power plug or power adaptor securely and firmly into an AC power outlet.
Otherwise, overheating will occur, possibly resulting in electric shock or fire.
Do not pull, bend, rest objects on, or chafe the power cord or power plug or power adaptor. Damage to the
power cord or power plug or power adaptor can cause fire or electric shock.
Do not attempt to repair the power cord, power plug or power adaptor. If the power cord or power plug or
power adaptor is damaged or frayed, contact an authorized service representative for a replacement.
Periodically clean the power cord or power plug or power adaptor to ensure the connection is free of dust. In a
damp environment, a contaminated connector can draw a significant amount of current that can generate heat
and eventually cause fire if left unattended over an extended period of time.
Never the power cord or power plug or power adaptor with wet hands. Electric shock will result.
Stop operation immediately if your product emits smoke, excessive heat, abnormal smell or unusual noise.
These conditions can cause fire or electronic shock. Immediately turn your product off and unplug the power
cord or power plug or power adaptor, and contact an authorized service representative for service.
When disconnecting this product, hold the power plug or the power adaptor instead of the power cord. Pulling
on a power cord forcibly can damage it and cause fire or electric shock.
To prevent fire or shock hazard, do not expose this product to rain or any type of moisture.
If metal objects or a liquid get into this product, turn this product off and unplug this product immediately.
Contact an authorized service representative for service. Operating the contaminated product can cause fire or
electronic shock.
Never open or remove unit covers that are screwed with screws. A high-voltage component can cause electric
shock.
Do not alter this product or modify any parts. Alternation or modification can cause fire or electronic shock
Before cleaning this product, unplug the power cord or power plug or power adaptor. Electric shock
sometimes results.
Do not open or alter the casing of this product. Electric shock or injury may result.
Be careful about the location of the power cord, power plug or power adaptor to avoid it trips someone or
causing this product to fall, etc. It may cause injury or product failure.
Do not leave this product or any of its accessories on the floor to avoid someone break it when stepping on it
or injured by tripping on it.
Use only the included power cord or power plug or power adaptor. If other power cord or power plug or
power adaptor is used, fire or electric shock might result.
Keep batteries away from children and pets.
Keep the marker's cap or battery out of reach of children to prevent swallowing.
Be sure to use the specified type of battery only. Using incorrect type of battery can burn or leak.
Ensure that battery is installed with correct polarity. Incorrectly installed batteries can burst or leak, resulting
in spillage or injuries.
Page 3 of 25

Advertisement

loading