Ideaboard Interactive whiteboard User Manual page 17

 Button Setting
User can set the hotkey's coordinate by the following steps if the necessary.
Step 1 => Select hotkey size & "Enable Button" on the Button Setting
Step 2 => Move the cursor to the coordinate next to Button 1
Step 3 => Point on the"
Step 4 => Repeat Step 2 & 3 to set Button 2 to Button 10.
Step 3 => Click "OK" to save the settings
right top corner on Button" 1 in Whiteboard, the X,Y coordinate will be show
Page 17 of 25

10 hotkeys can be set

Hotkey strip (provided) can be pasted at any
position on the whiteboard

User can set Calibration, open application
software as Ideaboard hotkeys.