Receiving Radio Broadcasts; Tuning In To Stations Manually; Using Preset Tuning - JVC RX-5050B Instructions Manual

Receiving Radio Broadcasts

You can browse through all the stations or use the preset function to go immediately to a particular station.

Tuning in to Stations Manually

1 Press FM/AM to select the band (FM or AM).
Each time you press the button, the band alternates between FM
and AM.
The last received station of the selected band is tuned in.
2 Press FM/AM TUNING 5 or ∞ repeatedly until
you find the frequency you want.
• Pressing FM/AM TUNING 5 increases the frequency.
• Pressing FM/AM TUNING ∞ decreases the frequency.
Notes:
• When a station of sufficient signal strength is tuned in, the TUNED
indicator lights up on the display.
• When an FM stereo program is received, the STEREO indicator
also lights up.
• When you hold and then release the button in step 2 , the frequency
keeps changing until a station is tuned in.
14
Remote

Using Preset Tuning

NOT
Once a station is assigned to a channel number, the station can be
quickly tuned in. You can preset up to 30 FM and 15 AM stations.
To store the preset stations
AUTO MUTING
Before you start, remember...
VOLUME
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 2 again.
1 Tune in the station you want to preset (see
"Tuning in to Stations Manually").
TUNED STEREO AUTO MUTING
VOLUME
• If you want to store the FM reception mode for this station,
2 Press MEMORY.
The channel number position starts flashing on the display for
TUNED STEREO AUTO MUTING
about 5 seconds.
VOLUME
3 Press FM/AM PRESET 5 or ∞ to select a
channel number while the channel number
position is flashing.
4 Press MEMORY again while the selected channel
number is flashing on the display.
The selected channel number stops flashing.
The station is assigned to the selected channel number.
5 Repeat steps 1 to 4 until you store all the stations
you want.
To erase a stored preset station
Storing a new station on a used number erases the previously stored
one.
select the FM reception mode you want. See "Selecting the
FM Reception Mode" on page 15.
Remote
NOT
TUNED STEREO AUTO MUTING
VOLUME
TUNED STEREO AUTO MUTING
VOLUME