Chassis And Vehicle Identification; Suspension Alignment And Tire Balance - Fleetwood 2011 American Eagle Owner's Manual

CHASSIS AND VEHICLE
IDENTIFICATION
Several numbers are used to identify the vehicle
and components used on the vehicle.
The V.I.N. or Vehicle Identification Number is
assigned by the chassis manufacturer and is the
number used for vehicle registration. The V.I.N. is
found on the Federal Certification Tag attached on
the interior wall behind the driver's seat. Refer to
this information when ordering parts from the chas-
sis manufacturer or chassis dealer service center.
The F.I.N. or Fleetwood RV Identification
Number is located on the tag underneath the dri-
ver's side window on the outside of the motor
home. Use this number when ordering parts
through your Fleetwood dealer.
(Example)
SUSPENSION ALIGNMENT
AND TIRE BALANCE
The front suspension and steering system of this
vehicle was accurately aligned at the factory
before delivery to the dealership. However, after
you have fully loaded the vehicle according to
your personal needs, have the alignment
checked and adjusted, if necessary. To help pre-
vent uneven tire wear, check the front-end align-
ment periodically.
Please note that front-end alignment after
retail delivery is the owner's responsibility and
is not covered under the warranty.
(Example)
Located underneath the driver's side
window on the outside of the motor
home
Introduction
01-3