Enjoy High-Quality Video And Audio From A Dvd (Optical Connection) - JVC JX-B555 Instructions Manual

Enjoy High-quality Video and Audio from a DVD
Connect a DVD player to INPUT terminal 4, then connect a TV equipped with a component terminal
to the MONITOR OUT 2 and connect an AV receiver equipped with an OPTICAL connector to an
OPTICAL output connector.
This shows merely an example of connection. Also refer to the Instruction books of the other components you are using for their
connection and operation procedures.
DVD Player (Playback deck)
To
S-VIDEO
Output
To
AUDIO
Output
Connection precautions
• Turn off the power to all components before making con-
nections.
• Even when connection using a component video cord out-
put is used, also connect the S-VIDEO and audio cords.
The audio cannot be output unless an audio cord is con-
nected.
16
-EN
To Component Output
(green)
(blue)
(red)
To Digital AUDIO Output
OPTICAL
(white)
(red)
Y
INPUT
OPTICAL OPTICAL
1 2 4 5
LEFT
AUDIO
RIGHT
Cr/Pr Cr/Pr
Y Y
VIDEO
Cb/Pb Cb/Pb
WARNING : SHOCK HAZARD-DO NOT OPEN
VICTOR COMPANY OF JAPAN, LIMITED. MADE IN JAPAN
To To
S-VIDEO
AUDIO
Input
Input
TV
(Equipped with component terminals)
(Optical connection)
To Component Output
(green)
(blue)
(red)
4
Cr/Pr
Cb/Pb
JX-S555 Rear panel
OUTPUT MONITOR OUT
OPTICAL LEFT
1 2 1 2
LEFT
AUDIO
Cr/Pr
RIGHT
RIGHT
Y
AUDIO
VIDEO
Cb/Pb
AVIS : RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
To
To
AUDIO
Component
Input
Input
TV
• The video signals from the VIDEO component input at IN-
4 5
PUT and are output only at the component video out-
put terminals of MONITOR OUT
not converted into composite video and S-VIDEO signals.
• The OPTICAL signal from INPUT
put to the AUDIO MONITOR OUT OPTICAL connector. It
is not converted to an analog AUDIO signal.
• To watch the video input to INPUT
1
TV to the MONITOR OUT
: Signals
AV receiver
2
. The video signals are
4 5
, can only be out-
1 3
- , also connect a
.