Table of Contents
Advertisement
Useful Tips
S-VIDEO input/output connectors
• The S-VIDEO input/output connectors are those for the
Y/C (luminance/chrominance) separate video signals.
Component connectors
• Component connection is recommended when connecting
a DVD player or DBS tuner (equipped with component input
connectors) to a TV monitor.
Since a DVD disc is encoded with a component video (Y
color difference) signal format it can reproduce better
quality color than the composite or S-video signal used in
a VCR.
With a component connection, the signal encoded on a
DVD disc can be output in its original form to maintain the
highest quality picture.
S-video to component video conversion
• JX-S333 is equipped with the S-video/component video
conversion circuitry which converts the incoming S-video
signals into component video signals and emits through
all component video output connectors.
Notes:
• If both the S-VIDEO and component video connectors
are connected between the components, the incoming
signals are emitted through the respective output
connectors. (☞ P. 7 "Video input/output signals")
• The quality of the converted signals are equal to the
original S-video signal quality. Conversion process
never improve the picture quality.
18
-EN
• If these connectors are connected to a VCR equipped
with S-VIDEO connectors, recording and playback of
clearer video becomes possible by reducing loss in the
video signal.
DVD player
This signal is
converted into
component
video signal.
S-video
Audio
cord
cord
VCR without the component
video output
TV monitor
:Signals
DBS tuner
:Signals
Component
Audio
video cord
cord
TV monitor with the
component video input
Advertisement
Table of Contents
