Chevrolet 2009 Corvette Owner's Manual page 224

To insert multiple CDs:
M
1. Press and hold for two seconds. Two beeps
sound and LOAD ALL DISCS displays.
2. Load a CD and insert the CD partway into the slot,
label side up when INSERT CD # displays.
The player pulls the CD in.
3. Wait for INSERT CD # to display after the previous
CD is loaded, then load the next CD. The CD
player takes up to six CDs.
To load more than one CD but less than six, complete
Steps 1 through 3. When finished loading CDs,
M
press the button to cancel the loading function.
The radio begins to play the last CD loaded.
Playing a CD
O e
(Tune): Turn to go to the next or previous track.
{
(Reverse): Press and hold to reverse within the
current track.
|
(Fast Forward): Press and hold to fast forward
through the current track.
3-88
t u
SEEK : Press the left arrow to go to the start of
the current track if more than eight seconds have
played. Press the right arrow to go to the start of the
next track. If either arrow is held or pressed more than
once, the player continues moving backward or
forward through the CD.
t u
SCAN : To scan one CD, press and hold either
arrow for more than two seconds until SCAN displays
and a beep sounds. The radio goes to the next track,
plays for 10 seconds, then goes to the next track.
Press either arrow again, to stop scanning.
To scan all loaded CDs, press and hold either arrow for
more than four seconds until SCAN displays and a
beep sounds. Use this feature to listen to 10 seconds of
the first track of each loaded CD. Press either arrow
again, to stop scanning.
AUTO EQ (Automatic Equalization): Press to
select the equalization setting while playing a CD.
The equalization is stored when a CD is played. For
more information on AUTO EQ, see "AUTO EQ" listed
previously in this section.
BAND: Press to listen to the radio when a CD is
playing. The inactive CD(s) remains inside the radio
for future listening.