STRUCTURE AND FUNCTIONS Power Light (Red) Ready Light (Green) Jam Release (LF9052 & LF9051) 3 Pin Plug Power Cord Temperature Control Direction of Laminating Order laminating pouches separately...
Page 3
OPERATION GUIDE Switch the power “ON” to start. Wait 4 - 8 minutes for the machine to heat up. Green light will indicate that the machine is ready to use. Adjust the temperature according to the laminating pouche thickness. Select the laminating pouch according to the size of paper/photo you want to laminate.
Page 5
2. Excess lamination out of the machine using from the machine adhering to the roller. the Jam Release Switch 3. Lamination pouch (LF9052 &LF9051) or exceeds the standard Jam Reverse (LF9055). thickness. If the problem persists send the machine for a service at a registered service centre.