Canon PowerShot A 1000 IS User Manual page 106

~!
1>
Correcting Red-Eye Effect
Manual Correction
When the camera cannot automatically detect and correct red-eye, correct it manually.
Add a correction frame.
In Step 3 on the previous page, select
[Add Frame] and then press the
@
button.
Set the position and size.
Press the'"....
~ ~
buttons to move the
correction frame (green) to the red-eyes,
then use the zoom lever to adjust its size
so only the red-eyes are framed.
The area inside the frame will appear
enlarged in the bottom right of the screen.
When you press the
@
button, the first frame
will be set (white) and a new frame will appear.
When you have set the frame positions and
sizes, press the
e
button, then follow
Steps 3 and 4 on the previous page.
You can add up to 35 correction frames.
Removing Frames
In
S~
3 on the previous page, select [Remove Frame] and then press
the
~
button.
Press the
~ ~
buttons to select a frame, then press the
@
button.
x
Press the
e
button, then follow Steps 3 and 4 on the previous page.
106