Synchronized Recording - JVC UX-G55 Instructions Manual

Synchronized Recording

You can start and stop both playback and tape recording at
the same time.
To record the entire tracks
1
Load a disc or connect a USB mass storage class
1
device* and insert a recordable cassette.
• Press DVD/CD 3 or USB MEMORY 3*
current playing source, then 7.
2
Start recording.
The System automatically
REC
creates 4-second blanks between
the tunes recorded on the tapes.
On the main unit
2
• When either playback* or recording ends, both playback
and recording stop at the same time.
2
* For DVD Video: When a title is finished playing.
• When the tape reaches its end, both playback and recording
also stop at the same time.
To record a "Live" disc
It will not be desirable to put 4-second blank portions
between the tunes recorded on the tape.
To record the entire tracks without any interruption
recorded, pause playback (press DVD/CD 3 or USB
MEMORY 3* , then 8) before pressing REC.
1
To record Program Play
1 Select Program Play (and make a program), but do not
start playback.
2 Press REC to start recording.
• When disc play stops, recording stops automatically.
INFO
1
to select the
To record only your favorite track
You can specify tracks to be recorded on the tape while
listening from a disc (except for DVD Video/DVD-VR) or
USB mass storage class device*
1
Start playing a disc/file.
1
*
USB
DVD/CD
MEMORY
2
While a track you want to record on the tape is
playing...
Playback returns to the
REC
beginning of that track and the
track is recorded on the tape.
After recording the track,
playback and recording
On the main unit
automatically stop.
3
Repeat steps 1 and 2 to record other tracks you want.
• You can change the disc if necessary.
To protect your recording
Cassettes have two small tabs on the back to protect
from unexpected erasure or re-recording.
To protect your recording, remove these tabs.
To re-record on a protected tape, cover the holes with
adhesive tape.
1
* For UX-G60 only
1
.
29