Whirlpool HT220 User Manual page 14

Ceramic heater
Table of Contents

Advertisement

A. C.
Operation Method
Check before turning on the machine
1. Check if the power wire is under good condition.
2. The product adopts 220V AC power supply, before use, please confirm if the rated
current of the power socket meets the local requirements with safe grounding device,
otherwise, please replace it with the qualified socket.
Put the machine on the flat place
Uneven place may possibly cause the turnover switch at abnormal position, then the
heater can't work after turning on, therefore, please put the heater on the flat place,
at least the surface below the base of the heater must be flat.
Temperature Control Knob
Insert the plug into the power socket, then turn the Temperature Control knob
clockwise, when hearing the "poop" sound (it means the temperature controller is on),
adjust the Temperature Control knob to the desired temperature level.
Power Selection Knob
Turn the Power selection knob to select between 4 functions: Low 1200W(LOW), High
2000W(HIGH), Low 1200W Swing (LOW SWING), High 2000W Swing (HIGH SWING).
Turn off the Heater
A. Turn the Power selection knob to OFF position.
B. Turn the Temperature Control knob anticlockwise to the initial position.
C. Remove the power plug, store the heater after the entire machine has become cool.
Safety Protection
A. Overheating protection device: when the working environment is abnormal or the
operation is incorrect which cause high temperature in the heater, the temperature
control component will automatically cut off power supply and stop working; after the
entire machine has become cool and the fault has been removed, it may recover to
normal use.
B. Tip-over safety protection device: When the machine is turned over, the safety
system will automatically cut off the power supply, after uprear the machine, the heater
may recover to the working status.
C.Anti-frost function: When the machine is on, turn the Temperature
Control knob to the "MIN" position, and when ever the room temperature drops to 0-5 ,
the heater will automatically turn on. When the room temperature is over 5 , the fan
heater will automatically turn off.
15

Advertisement

Table of Contents
loading

Table of Contents