Setting A Password - Epson PowerLite S18+ User Manual

Entering a Password to Use the Projector
Saving a User's Logo Image to Display
Parent topic:

Setting a Password

To use password security, you must set a password.
1. Hold down the Freeze button on the remote control for about ten seconds or until you see this menu.
2. Press the down arrow to select Password and press Enter.
You see the prompt "Change the password?".
3. Select Yes and press Enter.
4. Press and hold down the Num button on the remote control and use the numeric buttons to set a
four-digit password.
The password displays as **** as you enter it. Then you see the confirmation prompt.
Projector Security Features
97