Position The Image - Clarity WN-5220-S User Manual

Clarity Visual Systems
Use the Sharpness menu to toggle Sharpness On/Off. In general, the
sharpness should be off (no X) for composite and S-video sources,
and on (with X) for PC, MAC, or RGBS sources. Sharpness controls
an internal filter that reduces some types of video noise and softens
the edges.
1. Press the remote
control MENU
button
2. Press the up/down
arrow keys
3. Press ENTER
4. Press the up/down
arrow keys
5. Press ENTER
6. Press PREV MENU

Position the Image

Use the arrow keys to adjust the position of the image on each
display unit.
June 1999
36
Displays the main menu.
Move the cursor to the Misc Control selection.
The Misc Control menu is displayed.
Move the cursor to the Sharpness Selection.
Use the ENTER key to toggle sharpness on or off.
for PC, MAC, RGBS; off for Comp and S-video.
Exit the Misc Control menu.
Source Select
Frequency
Phase
Input Level
Position
Zoom
Wall Processor
Color Balance
Curtain
Hours
Save Config
Recall Config
Reset Config
Misc Control
About
Position
%
"#" "$
&
On