Toyota Matrix 2010 Quick Reference Manual page 182

Hide thumbs Also See for Matrix 2010:
Table of Contents

Advertisement

● In order to maintain efficient engine braking and electrical charging
performance, do not use "D" (automatic transmission) or the 5th
gear (manual transmission).
● Due to the added load of the trailer, your vehicle's engine may
overheat on hot days (at temperatures over 85°F [30°C]) when
driving up a long or steep grade. If the engine coolant temperature
gauge indicates overheating, immediately turn off the air condition-
ing (if in use), pull your vehicle off the road and stop in a safe spot.
(→P. 391)
● Always place wheel blocks under both the vehicle and the trailer
wheels when parking. Apply the parking brake firmly, and put the
transmission in P (automatic transmission) or in 1 or R (manual
transmission). Avoid parking on a slope, but if unavoidable, do so
only after performing the following:
Apply the brakes and keep them applied.
STEP
1
Have someone place wheel blocks under both the vehicle and
STEP
2
trailer wheels.
When the wheel blocks are in place, release the brakes slowly
STEP
3
until the blocks absorb the load.
Apply the parking brake firmly.
STEP
4
Shift into 1 or R (manual transmission) or P (automatic trans-
STEP
5
mission) and turn off the engine.
● When restarting after parking on a slope:
With the transmission in the P position (automatic transmis-
STEP
1
sion) or the clutch pedal (manual transmission) depressed,
start the engine. On vehicles with an automatic transmission,
be sure to keep the brake pedal pressed.
Shift into a forward gear. If reversing, shift into the R position.
STEP
2
Release the parking brake (also brake pedal on vehicles with
STEP
3
an automatic transmission), and slowly pull or back away from
the wheel blocks. Stop and apply the brakes.
Have someone retrieve the blocks.
STEP
4
I n f o r ma t i o n P r o v i d e d b y :
2-5. Driving information
2
161

Advertisement

Table of Contents
loading

Table of Contents