Access Point Select
You can select the IP sharer to use when using a wireless network.
1.
Press the MENU button to display the menu.
Press the A or l' button to select "Setup", then press the ENTER G' button.
2.
Press the A or l' button to select "Wireless Network Setup", then press the
ENTER G' button.
3.
Press the A or l' button to select "Access Point Select", then press the
ENTER G' button.
~
The wireless Access Points that exist in you area are searched and
displayed in the Access Point List.
4.
Press the A or l' button to select the Access Point to use. Then press the
ENTER G' button.
~
If a wireless Access Point is not in the Access Point list, press the Red
button.
~
When the connection is made, you will be returned to the screen
automatically.
~
If you selected an Access Point that requires security authentication, enter
the security key.
~
You can enter up to characters for a security key.]
~
The character set may differ and the red button may not appear
depending on the Access Point.
~
If you have selected an Access Point with a security authentication:
- The Security Key input screen appears.
- Enter the security key and press the ENTER G' button.
- Using the Remote Control Buttons on the Security Key Input Screen
Button
I,,_O-=.Lp-=-er:....:a:.:.ti:....:o.:..:n-=-s~_~~~~~_~_
Wheel
(All' I ....
/~)
I
Moves the selection up/down/lefUright.
-----~------
I
ENTER G'
I
Enters (Inputs) the selected character.
-----------------lSwitch between Upper- and Lower-Case
RED
I
Letters
I
You can delete an already entered
GREEN
I
, character.
---------.--.----
- - - ; 1 - - - - - - - -
BLUE
- Press this button to finish entering the
____________ . . _._.
~ecurity ~~_y.
.
_