Ricoh D104 Product Support Manual page 38

Other MFP Support Information
Not Applicable
Counters
User Tools / Counter Counter
User Tools / Counter Arrow Down
OK Arrow up until Display / Print Counter
Maximum 7 digits
Mechanical counter 7 digits – Location: open front cover – Left Hand Corner. This counter is covered.
Auto Color Selection (ACS)
The following is the same as the ACS mechanism on the D037/D038/D041 series.
In B&W mode, B&W pages printed after a color page are counted as black and white. In ACS mode, these pages are counted as color
mixed pages.
Once the ITB (Image Transfer Belt) unit has moved into contact with all the color drums to print a color page, it remains in this position
throughout the end of the job, even if there are B&W pages following the color page. For example, when sending 10 copies of 5
originals as one job and only the second page contains color data, the ITB unit moves into contact with all the color drums just before
printing the second page. It then remains in contact with the drums until all 50 pages have been printed out.
B&W Color
1st 2nd
In this example, the counters would then increment as shown in the table below.
SP Number
SP8-581-004 D: Color
SP8-581-005
SP8-581-006 C: Color
SP8-581-007
D: Developments (Color = CMY drums, B&W = Bk drum)
C: Copies
Note: The counters count up in the manner explained above, in order to accurately reflect the number of color and B&W outputs
made. This means that when printing B&W pages after a color page has been printed, the color counters do not count up (even when
the color drums and development units rotate). So the usage of the various drums is not reflected accurately.
Ver.1.5
Product Support Guide
OK Print Start
System Settings
OK Print
B&W
3rd
Counter Counter
Value
6
D: B&W 5
2
C: B&W 3
Page 38 of 43
Subject to change without notice
D104/D106
OK Arrow up until Administrator Tools
Start
B&W Color
4th 5th
12/9/2011