Page 1
KÄYTTÖOHJE INSTRUKCJA OBSŁUGI SATELLIITTIKAIUTINJÄRJESTELMÄ САТЕЛЛИТНАЯ АКУСТИЧЕСКАЯ СИСТЕМА Sisältää seuraavat osat: SP-F303F ja SP-F303C Составлен из компонентов SP-F303F и SP-F303C INSTRUCTIONS BEDIENUNGSANLEITUNG MANUEL D’INSTRUCTIONS GEBRUIKSAANWIJZING MANUAL DE INSTRUCCIONES – 1 – SP-F303 SP-F303 HASZNÁLATI UTASÍTÁS PŘÍRUČKA OBSLUZE ИНСТРУЦИИ ПО ЭКСППУАТАЦИИ LVT1047-001A...
Thank you for purchasing a JVC speaker system. Before you begin using these speakers, please read the instructions carefully to be sure you get the best possible performance. If you have any questions, consult your JVC dealer. Warnings, Cautions and...
Assembly Assembling the satellite speakers Each speaker (except the center speaker) has been divided into two parts for shipment. Before using this speaker system, assemble it first by following the procedure below. • Prepare a Phillips screw driver. Speaker section Before assembling—...
Page 4
Assembly (continued) Connect the speaker cord to the speaker terminal. • Each speaker can be used as front or surround speaker. Use the 5-meter speaker cords for front speakers and 10-meter speaker cords for surround speakers. Twist and pull the insulation coat to remove.
Page 5
Connecting the Center speaker • To connect the center speaker, use the same type of speaker cord (5 m; tagged with “CENTER”) as used for connecting the front speakers. Insert the speaker cord into the speaker terminal. Press and hold Insert the exposed the clamp.
Before connecting— • Turn off the power to the amplifier before connecting the speaker system; otherwise, the speakers may be damaged. • The impedance of each speaker is 8 Ω. Before connecting them to your amplifier, check the speaker impedance range of your amplifier.
General Layout of Speakers Place all speakers at the same distance from the listening position if possible. • Usually place the center speaker close to the TV. Surround left * For a subwoofer to be used with SP-F303, it is recommended to use SP-DW103.