Product Features - HoMedics 3D Extended Track Shiatsu Massager Instruction Manual

IB-SBM480PFEU-0212-02_Layout 1 17/02/2012 12:24 Page 4

PRODUCT FEATURES:

Demo Button - For a brief
demonstration of the features of the
Shiatsu Massaging Cushion, press the
Demo button. The unit will briefly go
through each function. Once complete,
the unit automatically turns off. The
L.E.D. light will blink to indicate the
s.
active function
Shiatsu Massage - Shiatsu is a deep
kneading circular massage.
Shiatsu Programs
preset programs where the Shiatsu
massage travels up and down in a
specific area of the back. To select a
program, simply press the button and
the LED will illuminate. To deselect,
press the button again or press another
button.
= Full Back
= Upper Back
= Lower Back
Spot Shiatsu - While the unit is in
Shiatsu massage, press either button to
stop and focus the Shiatsu action in one
place. Once the unit is operating in Spot
Shiatsu, you may adjust the mechanism
position by holding down either button
until the desired position is reached.
The Up Arrow will move the mechanism
upwards and the Down Arrow will move
it down. Once you release the button,
the mechanism will stop in that place.
Power Button - To turn on the unit,
first press the POWER button. The LED
indicator will illuminate and confirm
your selection. To turn off the unit,
simply press the button again. The LED
indicator will blink while the back
massage mechanism returns to its
lowest point and then it will turn off.
- Choose from 3
Vibration Massage - Add invigorating vibration massage
to any shiatsu or rolling massage program.
Perfect Fit
massage to your height, press the
"Perfect Fit" button at the highest
desired position. The massage heads will
not travel higher than that position for
the duration of the massage. To deselect
the Perfect Fit feature, press the "Perfect
Fit" button a second time. The massage
will return to its full travel.
Rolling Massage
Rolling is like two hands or thumbs
working up and down your back.
Rolling Programs
preset programs where the Rolling
massage travels up and down in a
specific area of the back. To select a
program, simply press the button and
the LED will illuminate. To deselect, press
the button again or press another
button.
Width Adjustment
is in Rolling massage for the back, press
this button to adjust the distance or
width between the massage heads. With
each press, the massage heads will move
to the next available position.
Heat
massage is on, simply press the heat
button and the corresponding
red L.E.D. light will illuminate. To
deselect, press the button again and the
corresponding L.E.D. light will
turn off.
For your safety, heat cannot be turned
on if massage is not selected.
NOTE: There is a 15-minute auto shut off on the unit for your safety.
NOTE: The moving dual massage mechanism on the back always
"parks" or finishes in its lowest position. It will continue to this
position after the power has been turned off. If the electrical supply
is interrupted, when power is restored, the mechanism will "park"
or move to its lowest position
4
- To customize the
- Choose from 3
- While the unit
- For soothing heat when