Tone Signalling When Receiving Dsc Calls; Rx Log Menu - Skanti VHF 1000 P DSC Operator's Manual

Tone signalling when
receiving DSC Calls
TONE SIGNAL
DISTRESS
CALL
DISTRESS &
URGENCY
1 sec.
VHF
CONNECT
3 sec.
ALL SHIP
SAFETY CALLS
OTHER
DSC CALLS
35294
The tone signalling sequence is repeated every 30 seconds or
until the DSC call is either read or answered.
When handset is hooked off, there is a short tone every 30 seconds
until call is read.

RX LOG Menu

The RX LOG menu is used for reading all information on DSC calls
received. Also, if requested by a DSC call received, it is possible to
set up a DSC acknowledgment call.
The RX LOG menu has the following main menu entries:
1. LAST CALL
When a DSC call has been received and the handset toggles call
information, to view all calls and/or answer back, enter this item.
2. ALARM CALL
To view DSC distress calls, and all calls of CATEGORY distress
or urgency, enter this item.
3. CALL
To view DSC calls from the VHF DSC modem ordinary calls
buffer, CATEGORY safety or routine, enter this item.
7 sec.
30 sec.
Restarts
after
30 sec.
17