Keyboard Lock; Intercom - Skanti VHF 1000 P DSC Operator's Manual

Keyboard Lock

The handset has a keyboard lock, which locks some keys to avoid
unintentional channel changes during a telephony session.
When the keyboard is locked the only functions that can be con-
trolled are:
1. Setting the volume level.
2. Setting the squelch level.
3. Channel up/down.
To lock the keyboard:
Press (second time, press for 1 second).
MEM
1 08 04
The key symbol appears, indicating that the keyboard is locked.
Unlocking the keyboard can be done in two ways:
1. Press
The keyboard is unlocked.
2. Press for 1 second.
The keyboard is unlocked
and channel 16 selected.
14
6
VOL SQ
6
MEM VOL SQ
1 08 04
16
MEM VOL SQ
1 08 04

Intercom

If your VHF system has more than one control unit, it is possible to
carry out an intercom between two control units.
When the intercom feature is used the handset will perform as
follows:
Initiating an intercom from the handset to another control unit:
To call another control unit:
1. Press
This display indicates that the handset expects an input of the
location number to be called.
2. Press a numeric key to choose location to be called
3. If location 2 is NOT available,
the display shows
and no dialling is carried out.
If location 2 is available the
display shows
and a ringing tone is heard in
the speaker/earpiece.
IC
SELECT NO
Ex:
IC2
NOT AVAIL
IC2
CALLING