PRESONUS AudioBox 22VSL Owner's Manual page 39

Owner's Manual
Setting up an External MIDI Sound Module from the Start Page
Software: Virtual StudioLive and Studio One Artist
8. In the Receive From drop-down menu, select the
MIDI-interface input from which Studio One Artist
will receive MIDI data.
In the Send To drop-down menu, select the MIDI interface output
from which Studio One Artist will send MIDI data to your keyboard.
If your keyboard controller does not need to receive MIDI data from
Studio One, you can leave this unselected. If your keyboard does
need to receive MIDI data, you must connect a MIDI cable from the
MIDI Out of the MIDI interface to the MIDI In of the keyboard.
9. If this is the only keyboard that you will use to control your external
synthesizers and virtual instruments, you should check the box next to
Default Instrument Input. This will automatically assign your keyboard
to control all MIDI devices in Studio One Artist.
Click OK.
If you have a sound module that you'd like to connect, leave the
External Devices window open and proceed to the next part of this
section. If not, you can close this window and skip to Section 7.4.4.
MIDI instrument controllers (keyboards, MIDI guitars, etc.) send musical
information in the form of MIDI data to tone modules and virtual
instruments, which respond by generating sound, as instructed. Tone
modules can be standalone sound devices or can be integrated into a
MIDI instrument, such as a keyboard synthesizer. Studio One Artist refers
to all tone generators as Instruments. Once you have set up your MIDI
keyboard controller, take a moment to configure your sound module.
1. Connect the MIDI In of your external sound module
to the MIDI Out of your MIDI interface.
2. In the External Devices window, click the Add
button.
Studio One Artist Quick Start
4
4.2
35 35 35