Customizing Your Monitor - Sony Trinitron GDM-FW900 Service Manual

Customizing Your Monitor

You can make numerous adjustments to your monitor using the
on-screen menu.
Navigating the menu
Press the joystick to display the main MENU on your screen. See
page 11 for more information on using the joystick.
MENU OK MENU
SCREEN CENTER CONV
b
GEOM EXIT COLOR
LANG SIZE OPTION
Use the joystick to select one of the following menus.
1 CENTER (page 12)
S I ZE / CENTER
Select the CENTER menu
to adjust the picture's
centering or zoom.
2 6
2 SIZE (page 12)
S I ZE / CENTER
Select the SIZE menu to
adjust the picture's size or
zoom.
2 6
3 GEOM (page 12)
GEOMETRY
Select the GEOM menu to adjust the
picture's rotation and shape.
2 6
4 COLOR (page 12)
COLOR
Select the COLOR menu to
EASY EXPERT s R G B
adjust the picture's color
5 0 0 0 K 6 5 0 0 K 9 3 0 K 0
temperature. You can use
5 0 0 0 K
this to match the monitor's
I MAGE
RES TORA T I ON ON
colors to a printed picture's
colors.
5 SCREEN (page 14)
SCREEN
Select the SCREEN menu to adjust
L AND I NG
the picture's quality. You can adjust
the landing and moire cancellation
2 6
effect.
10
6 CONV (page 15)
CONVERGENCE
Select the CONV menu to adjust the
picture's horizontal and vertical
TOP
convergence.
BOT
2 6
7 LANG (page 8)
L ANGUAGE
Select the LANG menu to choose
ENGL I SH
FRANÇA I S
the on-screen menu's language.
DEUT SCH
ESPAÑOL
I T A L I ANO
NEDER L ANDS
SVENSKA
8 OPTION (page 15)
OPT I ON
Select the OPTION menu to adjust
DEGAUSS
the monitor's options. The options
include:
ON
• degaussing the screen
• changing the on-screen menu
position
• locking the controls
9 EXIT
Select EXIT to close the menu.
x Displaying the current input signal
The horizontal and vertical frequencies of the current input signal
are displayed under the main MENU. If the signal matches one of
this monitor's factory preset modes, the resolution is also
displayed.
MENU OK
MENU
SCREEN CENTER CONV
GEOM EXIT COLOR
LANG SIZE OPTION
the horizontal
107 . 1kHz / 85Hz
the resolution 1920 1200 and vertical
of the current frequencies of
input signal the current
input signal
x Using the joystick
1
Display the main MENU and select the menu you
want to adjust.
Press the joystick once to display the main MENU. Then
move the joystick up, down, left, or right to highlight the
desired menu. Press the joystick to select the menu item.
b b
2
Adjust the menu.
Move the joystick up, down, left, or right to make the
adjustment.
3
Close the menu.
Press the joystick once to return to the main menu, and twice
to return to normal viewing. If no buttons are pressed, the
menu closes automatically after about 30 seconds.
x Resetting the adjustments
Press the RESET button. See page 16 for more information on
resetting the adjustments.
RESET
Adjusting the brightness and
contrast
Brightness and contrast adjustments are made using a separate
BRIGHTNESS/CONTRAST menu.
These settings are stored in memory for the signals from the
currently selected input connector.
1 Move the joystick in any direction.
The BRIGHTNESS/CONTRAST menu appears on the
screen.
BR I GHTNESS / CONTRAS T
2 6 2 6
2
Move the joystick up or down to adjust the
brightness ( ), and left or right to adjust the
contrast (6).
If you select the sRGB mode in the COLOR menu
Confirm that the brightness ( ) and contrast (6) values are
adjusted respectively to the numbers to be set in the sRGB mode
shown in the BRIGHTNESS/CONTRAST menu. If not, press the
RESET button (for less than 2 seconds).
BR I GHTNESS / CONTRAS T
Values to be set
5 6 7 6
in the sRGB
s RGB : 5 6 7 6 mode
For more information about using the sRGB mode, see
"Adjusting the color of the picture (COLOR)" on page 12.
The menu automatically disappears after about 3 seconds.
11
GB