Weslo WETL59710.0 User Manual page 11

Cadence 26.0
Table of Contents

Advertisement

11. Partially tighten two 1/4" x 1 1/2" Bolts (3)
with two 1/4" Washers (31) and two 1/4" Star
Washers (11) into the Console Frame (92) and
the Handrail Bracket (not shown). Do not fully
tighten the Bolts yet.
Next, partially tighten four 1/4" x 1/2" Bolts (6)
with four 1/4" Star Washers (11) into the lower
ends of the Handrails (69, 71).
Press the lower ends of the Handrails (69, 71)
against the Uprights (77, 78) as you tighten the
four 1/4" x 1/2" Bolts (6). Then, tighten the 1/4" x
1 1/2" Bolts (3).
12. Lower the Uprights (77, 78) as shown.
See the inset drawing. Position the Uprights
(77, 78) so that the Frame (55) is centered
between the Uprights.
Firmly tighten the 3/8" x 2 1/2" Bolt (1) and then
tighten the 3/8" x 2 1/4" Bolts (8) on each side of
the treadmill. Do not overtighten the 3/8" x 2
1/2" Bolts.
11
11
31
71
3
11
6
78
12
55
View from Above
77
11
92
31
69
11
6
77
1
Side View
77, 78
55
8
78

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cadence 26.0

Table of Contents