Chevrolet Silverado 2015 Owner's Manual page 226

iPhone 3G, iPhone 3GS,
iPhone 4
There may be problems with
operation and function in the
following situations:
When connecting a device with
a more recent version of the
firmware installed than is
supported by the infotainment
system.
When connecting a device on
which firmware from other
providers is installed.
To connect and control a device:
1. Connect one end of the standard
USB cable to the device's dock
connector.
2. Connect the other end to a USB
port in the center console. See
Center Console Storage on
page 4-3.
3. Press the MEDIA button to
select the source.
The music information displays on
the radio s display and begins
playing through the vehicle s audio
system.
The device battery recharges
automatically while the vehicle is on.
When the vehicle is off while a
device is connected using the USB
cable, the device battery stops
charging and the device will
automatically turn off.
If the device is an unsupported
model, it can still be listened to in
the vehicle by connecting to the
auxiliary input jack using a standard
3.5 mm (1/8 in) stereo cable.
Menu
Press the MENU knob to display the
device Menu and the following may
display:
Browse: Select to display the files
or songs on the device. See
Browse Device Media later in this
section.
Infotainment System
Tone Settings: Select to adjust
Bass, Midrange, Treble, Balance,
Fade, and EQ (Equalizer). See
Tone Settings under Playing an
Audio CD in CD Player on
page 7-15.
Auto Volume: If equipped, see
Playing an Audio CD in CD Player
on page 7-15.
EQ (Equalizer): If equipped, this
feature adjusts the Equalizer
settings. See EQ (Equalizer) in
AM-FM Radio on page 7-8.
Browse Device Media
Use the following to browse:
Playlists:
1. Turn the MENU knob to highlight
and press to view the playlists
stored on the device.
2. Turn the MENU knob to highlight
and press to select a playlist
name to view a list of all songs
in the playlist.
7-19