Tools Required - Biketronics BT1000 Instructions Manual

Congratulations on your RetroRadio purchase! RetroRadio ties almost any Sony in-dash AM/FM,
CD/MP3 player to your 1996 – 2011 family of Harley Electra Glides and Road Glides with handle-
bar radio controls. Even the speed sensor signal is used to automatically control the volume!
Should you have questions regarding RetroRadio, feel free to call Biketronics Inc. An advantage
of using the Sony is the ease to incorporate the newest audio devices such as USB, satellite
radio, GPS, Bluetooth or iPOD/MP3 units with the radio system at reasonable costs.
A
D
A. Adhesive Vinyl Sheet & Biketronics decal
B. Yellow Antenna Wire (Local Reception)
C. Zip Ties – 2 each
D. Splash Cover for Radio Face (optional accessory)
E. Radio Wire Harness ** (Radio Black Connector
and Biketronics White Connector)
F. Mounting Blocks (Left and Right Sides, 4 - screws)
G. Biketronics (Orange) Module
1. Torx head screwdrivers #25 & #27
2. 3/16" Allen/hex wrench (Preferably ball end type)
Introduction
Parts Layout for Radio Package
B
C
E

Tools Required

F
3
G
5
1. Radio **
2. Radio Face **
3. Radio Trim Ring **
4. Black Bezel Plate
5. Radio Cage ** (Not Used –
3. #2 Phillips screwdriver
4. Harley shop manual (optional)
1
2
4
remove and discard)
** Included with Biketronic radio.
Page 3 of 10