Samsung LTW19HS Service Manual page 7

3. Disassembly and Assembly
Description
9. Remove the connectors.
Caution : Servicing is not supported for the PCB.
▶Assembly
10. The assembly is in the reverse order of the
disassembly.
11. Connect the disassembled snap and the LED
module again.
12. Fix the connecting wire with filament tape
Caution : If the wire is damaged when closing the
cover, an operating error may occur.
Therefore, make sure to close the
cover after fixing it with filament tape.
3-4
Photo
필라멘트테이프
Screws