Advertisement
MATERIAL INFORMATION
CARBONLITE 2000 combines many of the best qualities of
fiberglass and plastic materials.
CARBONLITE 2000 has high UV resistance. Deterioration rate
in intense sunlight is far better than conventional plastic materials.
Light scratches can be rubbed out with plastic polish and
even a scratched and worn surface can be machine buffed to
a high gloss.
CARBONLITE 2000 is resistant to changes in shape caused
by temperature and pressure. It maintains a stable shape and
will not creep, grow or warp.
CARBONLITE 2000 is tough, demonstrating high impact and
shock resistance. It is resistant to breakage from deep cuts and
stresses. If damaged, cuts or cracks will not grow or creep
unless re-injured.
CARBONLITE 2000 is compatible with several adhesives
allowing interior components to be bonded in place. Should it
be necessary, field or shop repairs are fast and easily
accomplished.
Although CARBONLITE 2000 is very tough, it is not indestructible.
Like all thermoplastics, it is not immune to very high and very
low temperatures. While far superior to polyethylene in the high
temperature range, the impact strength will be reduced at sub
zero temperatures.
CARBONLITE 2000 is vulnerable to harsh solvents such as
acetone, toluene or MEK, which will dull the surface and, with
continued exposure, will soften the material.
SEAT, BACKREST AND BACKBAND
All Eddyline seats, backrests and backbands are
designed with maximum comfort and adjustability for a custom
fit. A slight change in the position of the backrest can make the
difference between comfort and backache so, experiment with
it. The optional Backfloat
TM
deal of comfort to the backrest. You can change the inflation
level for different types of support (i.e. lower or upper back)
and you have the advantage of having your paddle float partially
inflated if you need to use it. Occasionally someone will have
his or her legs or feet fall asleep while kayaking. If this happens,
try changing the angle of the seat back and/or inflating a
Backfloat or paddlefloat and putting it under your knees for
support. You may also try changing the position of the foot
pedals.
There are two seating systems and both come with
the features below.
The backrest or backband is hinged at the connection
to the seat which allows it to be folded forward for ease of
loading and adjusted forward or back to suit your preferred
paddling position. You can also raise or lower it vertically with
a simple locking knob in the back. Raise it for more support
during touring or lower it for surfing and rolling. A more upright
seatback will facilitate bracing properly when paddling in rough
conditions or paddling for speed.
The padded backband encourages a more upright
paddling position and uses hardware and strapping that is
interchangeable with the backrest.
The backrest and seat sides are padded with nylon
covered foam for additional comfort and support. The seat
bottom pad is comfortable and extremely easy to install, remove
for cleaning, or replace.
backrest / paddlefloat adds a great
Advertisement
