Samsung HT-H4500 User Manual page 10

Connections
Installing the Speakers on the Tallboy Stand
* HT-H4530 only - Front Speakers
1. Turn the Stand Base upside-down and
connect it to the Stand.
2. Use the driver to combine the screws on the
3 marked holes.
3. Straighten a supplied speaker wire to the
gravity direction and put in the hole on the
center of Stand Base.
4. Connect the upper Speaker to the assembled
Stand.
5. Insert a screw clockwise into the hole on the
rear of the speaker using a screwdriver.
And then connect a speaker cable.
6. This is the appearance after the speaker is
installed.
Follow this steps to install other speaker.
Speaker Cable Connections
1. Match each speaker cable bundle to the correct speaker by matching the color coded plug on each bundle
to the colored sticker on the bottom of each speaker.
2. Connect the speaker wire plugs from each speaker to the back of the product by matching the colors of
the speaker plugs to the colors of the speaker jacks.
In case of HT-H4500
Front Speaker (L)
Center Speaker
Refer to page 6 for the speakers of HT-H4530.
Subwoofer
SURROUND
SURROUND
10
1
Stand Base
Stand
3
5
Surround Speaker (L)
SURROUND
Surround Speaker (R)
SURROUND
Front Speaker (R)
- English
2
4
Speaker
Stand
6